CONTACT US:

8613781947634

Your position:
Home > PRODUCTS > Air Filter > Dust Collector Filtration
  1. /d/pic/air-filter/air-dust-collect-filter-cartridge-909510-(3).jpg
  2. Air Dust Collect Filter Cartridge 909510
  3. Air Dust Collect Filter Cartridge 909510

Air Dust Collect Filter Cartridge 909510

Type: Dust Collect Air Filter Cartridge
Part number: 909510
Filtration accuracy: 99.8%
Total height : Customized/Standard
Filter layer: Paper
Description:

The air filter 909510 is designed to be installed in most standard filter housings and requires minimal maintenance, making it an economical and efficient solution that meets your filtration needs. Its compact size also makes it easy to install and replace.

Specifications:
Type Dust Removal Air Filter Cartridge
Part number 909510
Filtration accuracy 99.8%
Filter layer Paper
Filtration efficiency 99.8%
Video:

 











 

Note:
 
Cleaning method: Coconut palm filter can be cleaned by washing with water, but it is necessary to ensure that the filter is completely dry before use to prevent bacterial growth.
 
Cleaning frequency: The cleaning frequency of the filter element depends on its usage and degree of contamination. Generally speaking, regular cleaning can extend the service life of the filter element and maintain its filtering effect.
 
Drying treatment: After cleaning, it is necessary to ensure that the filter element is completely dry. If the filter element is not completely dry, it may lead to bacterial growth and affect water quality




Washing Method:


1. Carefully remove the filter element: first loosen the filter lock, remove the nut that fixes the filter element, remove the protective cover, and then pull out the filter element. Be careful to avoid impurities falling into the carburetor.

2. Wipe the filter housing: Use a cloth dipped in gasoline to wipe the inside and outside of the air filter housing.

3. Blow off the dust on the filter element: Starting from the inside of the filter element, blow off the dust on the inner and outer surfaces evenly along the diagonal direction. If there is no compressed air, gently tap the filter element with a screwdriver handle and then brush the dirt with a brush.

4. Check the condition of the filter element: Turn on the lighting and place it inside the filter element. Observe from the outside for any damage, small holes, or thinning, and also check for any damage to the rubber gasket. If there are any abnormalities, replace the filter element and gasket.

5. Clean the inside of the filter: Use high-pressure water gun or hair dryer to clean, or wipe the engine compartment components with a wet towel.

Inquiry

Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.