Designed for optimum flow characteristics to achieve reduced pressure drop
Finest materials and manfacturing processes ensure highest available efficiencies and increased lifetime
High contaminant retention through multilayered fiberglass technology
Compatible with different oil types, including rapidly biodegradable hydraulic oil
|Product||Equivalent Hydac Filter 1200R020V-HC-V-B6|
|Out Diameter||Custom made|
This filter element is mainly used to remove impurities from hydraulic stations in steel mills, and to filter oil in hydraulic workstations such as power plants and chemical plants.
1. Put off the original hydraulic oil before changing, check the oil return filter, oil absorption filter, pilot filter to see if there are iron filings or other impurities attached. If there are any hydraulic components failure, after cleaning, the cleaning system .
2. When changing hydraulic oil, all hydraulic oil filter elements (return oil filter, oil suction filter, pilot filter) must be replaced at the same time, otherwise it is equivalent to no change.
3, identify the hydraulic oil label, different grades, different brands of hydraulic oil are not mixed, may react to deterioration and produce flocs, it is recommended to use the excavator to specify oil.
4. Before the refueling, the oil-absorbing filter element must be installed first. The nozzle of the oil-absorbing filter core is directly connected to the main pump. When the impurities are light, the main pump is accelerated and the pump is pumped.
5, refueling to the standard position, the oil tank generally has an oil level gauge, look at the liquid level gauge. Pay attention to the parking mode. Generally, all the cylinders are fully retracted, that is, the arm and bucket are fully extended and landed.
6, after adding the oil, pay attention to the main pump to discharge air, otherwise the light will temporarily no action, the main pump is abnormal (air blast), and the air pocket damages the main pump. The air exhaust method is to loosen the pipe joint directly on the top of the main pump and fill it up directly.